Suitable running in conditions determine the service life of the band saw blade, which is closely related to the correct running in when the band saw blade is used at the beginning. After determining the normal cutting speed and the correct number of teeth, stop sawing with 70% of the normal cutting speed and 50% of the normal feed at the beginning. Saw and cut about 400-600cm ² After the area, the ability gradually rises to the normal speed and feed.

Comprehensive tips

The following factors will affect the sawing effect and the service life of the band saw blade:

>>Coolant selection

>>Sawing machine wire brush

>>Tension of band saw blade, initiative value is 300N / mm ² (n / mm) ²）

Ping An needs to know:

The scrap with tension is sent to the user. Therefore, when turning over the waste belt and loading it on the sawing machine, the following safe operation procedures must be strictly observed:

>>Wear protective glasses

>>Wear work gloves

>>Put on work shoes

Under ordinary circumstances, there are relatively detailed introductions in the application specification of sawing machine.