As we all know, the easy-to-use band sawing machine is an indispensable tool in industrial consumption. The application of band sawing machine can help workers better improve work efficiency. After purchasing a band sawing machine with good quality and low price, customers need to start from the following aspects in order to better ensure the service life of this kind of band sawing machine:

1. Correct selection and operation

The selection of high-quality band sawing machine and correct operation and adjustment of the sawing machine are necessary to ensure the service life of the band saw blade, and the good rigidity and working performance of the machine tool can avoid the great impact of vibration and various stresses on the band saw blade. In order to ensure the service life of the band sawing machine, it is also necessary to correctly select the band sawing blade to be used. This selection includes appropriate blade width, tooth shape and saw tooth angle. As long as the correct selection of the appropriate band saw blade and the need to stop the correct operation measures, the service life of the band saw machine can be effectively prolonged.

2. Adjust the relevant parameters and the concentration of cutting fluid

Correctly adjust the sawing parameters of the band sawing machine, mainly including the linear speed of the band, feed and tension of the band. When using the band sawing machine to stop data sawing, the ideal chip should be tight, silver and warm hand feel. If there is sintering phenomenon, or there are brownish blue, hypertrophic or powdery chips, it is necessary to stop adjusting relevant parameters. In addition, properly adjusting the concentration of cutting fluid can smooth and cool the band saw blade, and timely clean the iron cutting and other attachments on the sawtooth.

3. Properly run in the new band saw blade

To ensure the service life of the band saw machine, it is necessary to "run in" the new band saw blade correctly. The "running in" is to remove the burr of the tooth edge through the natural wear of the sawtooth, so that the band saw blade gradually enters the normal sawing state, so as to prevent premature blade collapse and rolling of the sawtooth, especially when sawing profiles, pipes and special-shaped data with sharp changes in section. When stopping "running in", adjust the parameters of the band sawing machine to about half of the normal sawing efficiency, and then gradually adjust the parameters of the sawing machine to enter the normal sawing state.

In short, if you want to better ensure the service life of the band sawing machine, you need to correctly select and operate, adjust the relevant data and the concentration of chip liquid, and properly run in the new band sawing blade. Only in this way can this quality guaranteed band sawing machine give full play to its better performance, ensure and prolong its service life, so as to reduce its maintenance cost.